Torque Solution Fiesta ST poly exhaust hanger kit (3 or 4 pack)

The hangers themselves are great - they're stiff, durable, and available here for a good price - but depending on which aftermarket exhaust you're fitting to your car, you might instead need two of Torque Solution's 10mm Long hangers for the muffler. I initially tried using these short ones to replace all four OEM hangers when I installed my Mountune CBE but found that the muffler and the bend in the midpipe both came into contact with the heat shield, and the exhaust tips were touching the rear bumper (actually pushing up on the diffuser). Switching the rearmost two to Torque Solution's long hangers put my exhaust exactly where it needed to be. The short ones are completely fine in the front though, the main part of the midpipe makes no contact. YMMV depending on which CBE you choose, this was just my experience with the Mountune system.

FWIW, compared to the OEM hangers under no tension, these short hangers are about 10-15mm shorter (hole centre to hole centre distance) vs. the long hangers which are about 10mm longer than the OEM. With the weight of the exhaust, the OEM hangers probably stretch to be nearly the same hole-to-hole length as the long TS hangers.

About half the price of the Cobb hangars and same great quality!